Daily Driver: 1961 Cadillac Brougham by Pininfarina

Sometimes my pixel pushing just doesn't quite come in line with my visions. I like this mythical Pininfarina-bodied '61 Caddy Brougham, following on from their '59s and '60s. Besides deleting the fins, something all manufacturers were beginning to do by '61, I widened the greenhouse, the glass and roof structure. I did that to lessen the shoulder width, to give it more of an Exner-like early fuselage look, like the '60 Valiant and '62 B-bodies. The finless and sloping trunk now look a lot like the beautiful '61 Oldsmobile, but I'm pretty sure Caddy would never have gone with it. On the other hand, it has the look of the '57-'58 Eldorado without the fins.

I think that's where I got this chop wrong. I extended the wheelbase from the donor Series 62, and the straight-edged upper window line looks wrong. It should be more of a graceful arch. I'm pretty sure Caddy would have insisted on the straight upper though. I created a bit of chrome trim near the taillights, pretty much leaving all "jewelry" associated with the rocket exhaust taillights , bumper, and lower skegs.The center-opening door handles line up with a '60 Eldorado-like chrome-edged and paint-filled full length molding. A gold Cadillac crest adorns the roof's sail panel.

Daily driver, so I didn't clean the whitewalls, lol.

• Bobf, this was done a few days before I read your last commetn out doing an Eldorado with a modified rear end. Great minds and all that, lol. I'm going to do a coupe or convertible though, a true Eldo next, per your suggestion.

Read More

1963 Cadillac Series Sixty One Coupe

Another stab at creating an entry level Cadillac for the 1960s, this time a 1963 coupe. Cadillac was soaring high in the '60s and in no way needed a reprise of its 1940s and '50s Series 61 line, but I like to think of what they may have looked like. "61s" were the least expensive and a bit more "youthful" perhaps, with a slightly sprier look than its more expensive siblings, replacing the LaSalle after 1940.

Above, the coupe. For this year I've spelled out "Series Sixty One" on the bodysides and trunklid, and given this example optional two-toning. The rear fascia has been simplified, deleting the expensive to produce chromed upper bumper "grille" trim and adding a simple sheet metal extension to the trunk lid. The look works perfectly with the already simple and elegant side trim.

• The '68 version from a few years ago.

Read More

Fifties Mercury "Sportscar" Unearthed-Needs Work

The late 1950s was a tumultuous time for Ford Motor Company. They were gung-ho on matching General Motors almost car-for-car, leading to the introduction of the Edsel, larger 4-seat Thunderbird, and the largest unit-bodied car built at that point, the glorious and gargantuan '58 Lincoln lineup. Following up on that would be the upsized and upmarketed Mercury lineup. Perhaps in the heady days of fall '57 when it became apparent Edsel was doomed and the bigger Tbird had yet to begin its meteoric sales climb over the '57 2-seaters, perhaps Mercury designers were called on to do a quick "sportscar" based on the new-for-'59 Mercury chassis. Cut down to about a 115" wheelbase, it still would have had the prestige of the Mercury nameplate. It would have had 2 small fold down rear seats and the Tbird's front bucket seats for true 2+2 seating. Using as many production components as possible, this Marquis coupe could have gone on sale in the first quarter if '59 if necessary, if the 4-seat Tbird had bombed.

Yeah, all this is fake, but I have fun reimagining the past! I really like the way this one turned out. It has a bit of late Loewy 2-seater designs in the greenhouse and the rocket motif works well on a sports coupe. I think it could have been the drivers' car of the day.

If I don't get back before then, I hope everyone has a great new year! I, for one, am very glad 2013 is coming to a close and I hope it doesn't kick me in the ass one more time before it's history, lol.

Read More

1961 Cadillac Eldorado Calais V12 Sport Coupe

Meant to evoke a vintage PR/Marketing post card, the altered proportions of my 1961 Eldorado Calais V12 Sport Coupe really show off the new-for-'61's tailored sheetmetal and gorgeous lower skeg fins perfectly balancing the upper tail fins. I added a bit of unique front fender trim meant to celebrate the first postwar V12 developed by a domestic automaker.

 

Quickie 2-hour project tonight . . . 

1961 Cadillac Eldorado Calais V12 Sport Coupe—What if Caddy had entered the personal luxury coupe/Thunderbird market segment a generation earlier than it did? What if Pininfarina's beautiful "Jacqueline" coupe had been a ruse to throw off any actual "coupe rumors" from leaking out of Cadillac?

I propose the '61 Eldorado could have been reborn as a super-exclusive and super-expensive V12 2+2 coupe replacing the previous Pininfarina Brougham sedan as the pinnacle of Cadillac's showroom. A full two-feet shorter than the standard Series 62-based Eldos of recent years, the V12 coupe would have seating for two. The rear compartment could be outfitted with occasional rear seats or  fitted luggage for a truly European Grand Touring experience. 

Although the front clip is extended to house the domestic industry's first postwar V12, at 115" the wheelbase is a full 15 inches shorter than the standard convertible. A shorter rear deck contributes to its overall 24 inch length reduction to approximately 200 inches.The roof is brushed stainless steel and the slightly broader, equilateral rear pillars hint at the new rooflines coming from Cadillac across the board for '62.

Read More

What if. . . Mark II Slantback?

The 1956-57 Mark II coupe is a tours-de-force. It is elegance personified with its formal roof and clean lines. It is one of the cleanest cars of the Fifties decade.

With this chop, I'm exploring what the car may have looked like without the severely formal and close-coupled roof.  I gave it a faster roofline and backlight. I straightened out the classic body contour kickup in the rear quarters and, obviously, gave it rear fender skirts and chromed rockerpanel trim.  Smaller details include moving the exhaust outlets down from below the taillights to below the bumper, thus extending the "tubular" rocker panel trim. I filled in the former exhaust pods and glassed-over the license plate recess. 

I'm not in any way "improving" the Mark II with these changes, that would be impossible! But I think this look could have been developed into a stunning car by the Mark's stylists had they gone in this direction!

Read More

If I Been There . . . Rendered 1948 Packard Ad

My take on a print ad for the 1948 Packard Super Eight Touring Sedan, done as if I was in the automotive community back in those heady, early post-war years in Detroit. I gave it a new tagline as well, "Your Day Has Arrived," referring to the optimistic post-war boom in the economy from the previously war-weary public.

"Your Day Has Arrived"

C H O P — The base image for this piece was a scan of an illustration of a '48 Super Eight from one of Packard's sales/dealer brochures. I found the jpg online, I believe at that awesome Old Car Brochures site, here.

While I didn't change the profile of this regal sedan one bit, I changed all the detailing on it and gave it a two-tone finish. Changes include the rear taillights, fender skirts, rocker panels, side spear and other trim. One of my friends, the esteemed Palm Springs Automobilist, blog link here and on my Blog Roll, told me my changes resembled what Bill Mitchell's studios might have done, high praise indeed!

Once I was done with the car I "lifted" it from its period layouts and stylistically placed it at the shore. Color matching created a very special and "eye-catching" ad if I do say so myself. Finishing it off was an optimistic new post-war tagline I created for this Packard: Your Day Has Arrived.

• I've reworked a couple of 1954 Studebaker ads, creating sedans from their lower, longer coupe bodies. It's posted at my original blog, casey/artandcoloujr. I didnt' realize it wasn't also posted here. Enjoy! Link, here.
  

Read More

Continental for 1958

Opalescent Pistachio Point Green lacquer perfectly highlights the lines of this Wixom-built '58 Continental coupe. Altering the new-that-year unibody Lincoln, I changed the proportions for more of a personal coupe appearance. The hood length looks back to the Classic era consisting of almost half of the length of the car. The four passenger interior would have been based on the '58 Thunderbird, itself brand new that year and also built at the fabled Wixom plant. The roof would have been available in linen-covered steel or brushed stainless to match the front fender coves.

And, yes, I started out with the regular Lincoln that year, not the upscale Continental. This mockup would have been early in the process and trim was still being mixed and matched and developed...

I also left off the spare tire hump... Rocketships don't need no stinkin' spare tires, lol.

Read More

Second Generation Tunnelback XL, 1972

1972 Ford XL SportsRoof, courtesy casey/artandcolour.

C H O P — Ford's 1971 redesign of its full-sized car line reverted to a single coupe style, a severely formal-roofed pillarless coupe with a C-pillar at least three-feet wide. This chop restores the second, "faster" roofline choice, or SportsRoof in Ford parlance. It also restores the "XL" nameplate which was unceremoniously dumped after the 1970 model year. The '69-70 Sportsroof was a flying buttressed, tunnelback, full sizer with almost perfect proportions. The roofline was shared with Mercury resulting in the now-classic Marauder coupes.

For this second generation tunnelback, I greatly enlarged the side windows of the production formal coupe. I gave the C-pillar the look of the '67 Galaxie XL, but with the '69-'70's inset rear window. I left virtually everything else "production" on this "XL," the extra-cost spoke wheelcovers, the bodyside rub strip, the proper width whitewall tires.

And having grown up with a '72 LTD Brougham coupe in high school, LIght Gray metallic with a black vinyl roof, I can verify that those optional spoked wheelcovers are HEAVY but meticulously crafted.

Read More

1961 Dodge Lancer GT—Hardtop Coupe

This rendering shows what a dedicated 1961 Dodge Lancer coupe have looked like. The pillarless coupe Dodge produced was hamstrung in the looks department by the beancounter decision to use the exact same roof stamping as the sedan. This meant an additional, stationary window was needed in the C-pillar, which just looked odd with the pillarless glass in front of it. My coupe shows what they could have done if they had OKed a second, sportier, dedicated coupe roofline. It almost hints at sister division Plymouth's Barracuda coming up for '64. With bucket seats front and rear, this Lancer GT would have looked great next to that year's Corvair Monza sport coupe and would have predated the Mustang by three and a half years. Falcon wouldn't have a hot pillarless coupe until the '63 model year.

About the early sixties Lancer in general, it's clear that it's a sister to the original Valiant. I'm convinced that in '61 though, Dodge pulled off the better looking car. I didn't change anything in the front of this rendering, and look at those awesome lines! The grille is expensive looking, the and fender blisters work perfectly with the headlights and hood. With the windshield laid back a few degrees and the roofline lowered a couple of inches, my reversed C-pillar accentuates the rear fenders. It was suggested by an actual stamping in the production car's fenders.

Not My First

This is't the first early sixties Dodge Lancer I've rendered. This road warrior/daily driver sedan was done a couple of years ago. As in the chop at the top, I changed the C-pillar to include that reversed kink. There is a little pressed indentation in the production Lancer's and Valiant's doors (or fenders on coupes) that looks like it would lead to this pillar. The actual production C-pillar doesn't relate as well. I also gave it suicide doors just because I think they're cool, lol. The Lancer in the base photo was in better shape than "mine." I did all the battle-scars and aging in Photoshop.

Not My First
I just realized this is my 100th post here. Time flies! I just wish I could do new ones every day!

Read More

Imperial Convertible, 300 Sport Wagon. Past Retro.

A mid 2000s 300 front clip, an extended wheelbase and a '69-'71 fuselage era-inspired Imperial body combine to make this very elegant 2008 Imperial Crown Convertible.

S H A M E L E S S   S E L F - P R O M O T I O N — My two little blogs clicked over 400,000 combined hits recently. Yeah, lol! To "celebrate" here are two more retro-inspired Chryslers I've created. These were done in my early days of rendering cars in Photoshop, 2005 or 2006, and the quality is a bit rough, but I love these two cars. Thanks to everyone that checks out my work and makes this blog-thing worthwhile!

An original '55 300/Imperial front clip is mated with a restyled 2005 Magnum sport wagon body. I also added typical Exner-period chrome rocket taillight tubes in the rear. I would love to see this car on the road, lol.

Read More

1964 Imperial Crown LWB 5-passenger Sedan

Inspired by the 5-passenger Mercedes Benz 600 of the mid 1960s, I've smoothed out Elwood Engel's '64-'66 Imperial's styling for this long wheelbase Crown sedan. I think it's the poster child for mid-century coolness and modernity.

C H O P S — And now for something completely different from my exuberantly elegant Exner Imperial redux, the dark blue '62, here...

... Elwood Engel's '64 clean-lined Imp elongated and smoothed out for this long wheelbase owner-driven Crown sedan. The cabin is enlarged and extended rearward for maximum second row accommodations. The color palette is "subtle Turbine car" with a much darker copperfire hue for the body and a lighter gunmetal gray for the vinyl roof and leather-and-broadcloth interior. Pulled up next to an appropriate mid-century house, this Imperial is ready for an early morning, high-speed run out to Palm Springs with four jet-setting friends and their perhaps, dubious, luggage.

B  O N U S   P I C :

I've also chopped this Imperial Crown Coupé 2-door limousine. This would be an ultra smooth, long wheelbase chopped roof luxury express.

Read More

1962 Imperial Lebaron Southampton: Facelifted

This chop of a 1962 Imperial LeBaron 4-door hardtop, or Southampton, is a facelift that might seem pretty minor unless you were to see them side-by-side. After Exner's classic 1957s came out with their sculpted-in-form lengthy rear fins, which put the emphasis on the rear of the car, he began thinking about his "next" look. This next look, as previewed by the 1960 Valiant, would have gone back to classic proportions with a long hood and short rear deck. There was an emphasis on fender forms, as evidenced by the Valiant and the '62 Fury and Polara. "Ex" suffered a major heart attack before these cars could be finalized, the so-called "S-cars," and his successor, Elwood Engel, took things in a different direction.

"My" Imperial, above, takes the '57'-63 chassis and body, but changes it in some ways to more closely replicate this new emphasis on the front. I lengthened the hood and wheelbase around six inches in front of the windshield, giving a more classic steering wheel:axle proportion. I shortened the rear deck by about the same amount, giving a forward rather than rearward "motion" to the car. I also gave this imposing sedan rear fender skirts. I'm not really positive Exner would have, he was very much moving into a classic look with full wheel cutouts, but I like skirted rear wheels. I like to think I might have been able to talk him into it, at least for one year, lol. I left the amazing separate chrome front- and rear lights, but I lowered the roof about three inches for a bit more of a custom look. I also "finished" the chrome rocker panel trim behind the now-skirted rear wheels, the entire bottom of the car now edged with chrome.

Read More

1958 Lincoln Premiere Coupe Pickup

Just the thing for the "Gentleman Farmer" of 1958—the Lincoln Coupe Pickup.

C  H O P S — While "chatting" on FB today, in a post about the original '57 Ranchero and '59 El Camino, I mentioned that I liked both of thm, but that I'd like an uplevel interior in them. The Fairlane 500 and Impala trim would have been nice to be able to choose, but then again, in that time period, both of those car-based trucks were considered pretty "fancy" anyway, even with their bargain basement interiors. I began to wonder what a similar period Lincoln or Cadillac car-based pickup would look like. At the time, I thought the Lincoln Mark's reversed C pillar would look great on a pickup. I had a few minutes tonight to relax, so I thought I'd give it a go.

I soon realized that I preferred the "regular" Lincoln Premiere's wraparound rear window. It would give a bit more space behind the front seats, perhaps to enable them to recline, and it also gives a nice symmetry with the front windshield. And it's not as if the car needed an extra foot of cargo space, lol, this first series of unit-bodied Lincolns was almost 19-feet long to begin with! I "painted" the car in a period salmon-beige with a white roof and Photoshopped a new background in that complimented those new colors. I also added some of my flowers, lol. I think this worked out a million times better than expected. At least! : )

Read More

1966 Thunderbird Speedster Showcar

"If I Had Been There"

Quick Study: Loyal blogreader, "Bobf," suggested I try a Speedster version of the mid '60s Thunderbird. This is what I came up with, in the manner of a period '66 Ford showcar, complete with Cragar wheels, whitewalls, cut-down windshield and redesigned side glass. I "welded" the rear fender skirts into the body, removed the doorhandles and nameplate, added the sidepipes and a modified '66 Mustang scoop trim piece, all things they might have done in the Ford studios of the time. I wouldn't mind taking a country drive in this Tbird! I started with a base photo from a website called Bold Ride, found a background image at a wallpaper site and did the rest with the magic of Photoshop.

B T W :

This car inspired me... I'd love to see a TV show based on the automobile industry in Detroit, circa 1958-71. It could be a Mad Men-ish look at a major automotive design studio, and its execs, designers, clay modelers, and their wives, boyfriends, affairs, drinking and swearing habits, their custom cars, rushed clay models, weekends at the Grosse Point Yacht club, hijinks, shenanigans, their personal relationships... You know, but with a heavy emphasis on the cars and how those cars affect their lives, professionally and personally. There could be a 10-minute Epilog at the end of each 80 minute episode; an historic "sidebar" of an actual show car and short history and sexy trivia.

B T W :

Marty Martino, a new reader to casey/artandcolour, but a long-time car builder and afficionado, mentioned the '63 Thunderbird Italien when commenting about my Speedster. A long time ago, I did a chop of what a square-edged '64 'Bird might have looked like with a fastback, hence my '64 Italien 2. I think this chop is about 5 years old. I'll take another stab at a factory Tbird fastback one of these days.

 

A full length brushed aluminum lower body side strip was added, too.

Read More

1961 Plymouth Fury Design Tweak

Refining One of Virgil Exner's Last Masterpieces

For this week's design tweak, I chose a 1961 Plymouth Fury 2 door hardtop. While I find the original Exner design stunning, its contemporary buying public didn't agree. Many automotive hacks wracked their brains trying to colorfully describe this car—The Car that Ate Tokyo—a riff on the Japanese horror flicks of the day, comes to mind, and they still do to this day in classic car magazines. The "pinched" grille and dramatic headlight placement seems to be the car's main issues, although the suddenly finless body was referred to as a "plucked chicken" by Exner himself. My main issues are with the details. There are fussy chrome doodads, fussy side sculpturing and an abundance of shiny chrome slathered in the front. Ironically, Lexus is just now introducing its new "spindle" grille across its entire lineup, and it's almost exactly the same shape as this '61 Plymouth. See the BTW sidebar at the end of this post. Let me describe how I "fixed" it to my own tastes.

T H E   C H O P — First I "radiused" the rear wheel wells. This means I opened up the fenders to reveal the entire wheel and tire. The original had a very low wheel opening which didn't really relate to the front wheel well and made the rear end look like it was dragging. I think this change did the most for "lightening" the look of the car. I resculpted the sides, continuing the front fender shoulder all the way to the back of the car instead of ending it at the front door. I also eliminated the ornate trim behind the front doors, and lowered the entire car about 3 inches so it sat closer to the ground hugging the tires more. At the front, I blackened-out the grille, which simplified the look of it, and made the dramatic "swoosh" around the protruding headlights work better. I added a satin chrome "header" above the now-black grille, with P-L-Y-M-O-U-T-H letterspaced across it. This serves to "rationalize" the grille shape, giving more prominence to the horizontal aspects of it, rather than the angularity of the opening. The front bumper was simplified too, deleting the rather baroque center section with its five raised ridges, and I raised it a few inches so it wasn't so close to the ground.

The original photo of the '61 Fury. Note the odd way the front fender shoulder sculpturing stops at the front door cutline, though the chrome trim continues. Also, just behind the front door is a set of chrome hash marks that seem really out of place, though they do serve as a start for a small sliver of white paint, matching the two-toned roof. The rear of the car seems to drag, a combination of the now-finless rear fenders and very low wheel well opening.

BTW: 

Exner has the last laugh after all, as Lexus introduces its brand new "Spindle" grille on its entire lineup. I call it an updated '61 Plymouth grille!


U P D A T E :  For some reason my chop wasn't enlarging from the thumbnail. Now it should be.

Read More

1971 Cadillac Eldorado Design Tweak

This was a fun chop to create! I've been thinking of older Cadillacs a lot lately, and have been finding original publicity photos online and saving them to my hard drive. This was a black-and-white press photo of the new-for-1971 Eldorado convertible, a car that is most definitely a modern classic. In addition to the design changes, detailed below, I added in a subtle 4-color hand-tinted look to the rendering.

For this design "tweak," the biggest change I made was restoring the hidden headlights of the 1967-68 Eldorados. Besides being a very period touch, hidden headlights really clean up a front end. I broadened the grille to full-width, removed the stand-up hood ornament and added the Cadillac wreathe-and-crest to the hood, a '67-'70 styling cue. Then I cleaned up the bodysides, removing the mid-level chrome spear and the front nameplate and engine logo. I moved the front cornering lights down into the rocker panel to blend better with the chromed rocker panels between the wheelwells. I left the nifty decorative rear fender "vent" as it's such a great nod to not only the original Eldorado of '53 but most Cadillac models of the '50s. Then I added back in a teeny tiny letterspaced E-L-D-O-R-A-D-O nameplate on the lower front fender and a wreathe-and-crest logo on the rear fender. Last addition? A Connecticut license plate.

Overall, I tried to "clean up" a classic GM design. Ballsy perhaps, but the late, great Bill Mitchell isn't around to yell at me, lol. But that would be COOL!

T E C H N I C A L   T H O U G H T — At first I completely "shaved" the sides of the car, airbrushing in a perfect white paint job where I had removed the chrome bodyside spear etc. But the sides looked too "flat" without reflections. I looked back at the original image and added back in the very subtle horizontal reflections all along the lower sides of the car. Now I think they look like I didn't quite remove the chrome spear correctly, lol. I went back and forth several times, with them, without them, with them, without them, finally deciding to leave them in the final rendering.

Read More

Needs Work! '80s Imperial Crown Coupe

1982 Imperial Crown Coupe—restoration needed! One of my tongue-in-cheek chops, this was a perfectly acceptable 1982 Imperial coupe when I started with it. I gave it a more "private" greenhouse with a stainless steel "crown" roof section, much wider C pillars, a 1960s Imperial nameplate on the trunk, and larger wheels on blackwall tires. Then I gave it rusty patches bubbling up in several places, chalky paint and a For Sale sign, placing the car in a typical stretch of car dealerships in Anytown, USA. I think this design could have worked, Chrysler certainly wasn't against retro styling, the Imperial often flaunted Classic-era touches. (I did this chop a while ago, but couldn't find it posted. Maybe I just didn't label it properly, but if that's the case, please enjoy it a second time!)

: )

Read More

1961 Lincoln Continental Coupe(s)

1961 Lincoln Continental coupe—Lincoln has long been my favorite luxury carmaker, and a favorite subject for me to play around with in Photoshop. I chopped this production coupe a few years ago, but it has held up well—one of the advantages of starting with classics! I know that the 1961 Lincoln Continental sedan's design began as a Thunderbird prototype, and I've seen black-and-white images of the clay models. I found this publicity photo of a sedan, and thought I'd see how a production coupe would have looked. I didn't modify anything except the roofline. Lincoln came out with a Continental coupe in 1966, and I think you'll agree the '61 version would have been just as desirable!

If you look on the wall in the photo above, you'll see an image of a '61 Lincoln station wagon. I  added that little touch to the photo for the eagle-eyed among us. I never got around to creating that exact wagon, but I've photoshopped a '65 Lincoln station wagon, also pretty desirable if I say so myself. This example has been a bit "resto-modded" with "mag" wheels. It's pretty obvious how much I love Lincolns. Now if they can just get on track for the 21st century!

There are other coupes!

• For a slightly different take on a '61 Lincoln coupe, click here. I took the proportions of the Continental Mark series for this chop, shortening the trunk, lengthening the hood and gently massaging the entire car.
• For yet another take on a 1961 Lincoln coupe, click here. For this one, read the short text accompanying the image. It gets a bit confusing, lol.
• I've also created a '64 Continental coupe, the square-edged, facelifted version of the '61-'63.

Read More

Short-Deck, 6-Window 1965 Cadillac Town Sedan

Re-imagining one of William Mitchell's flawless 1965 Cadillacs. Caddy built short-deck 6-window hardtop sedans in 1961, and 4-window short-decks in 62 and '63. They produced full-size 6-window sedans all the way through '64. Though they dropped the short-deck for '64, my chop presumes they decided to try again in '65 with the '61 formula—short-deck, 6-window—though pillared this time. Click on image to enlarge, as always.

C H O P S — Oftentimes, to relax, I'll peruse eBay's cars for sale. I'll pick a "marque  of the night," say Mercury, or Hudson, or Nash, and then go through the years and see what is still out there. Tonight I picked Cadillac—1961-72. I was struck how many 6-window sedans Cadillac showed up. They were very light-looking, almost sporty rooflines for such a stately luxury car. I found examples of them for sale right up through 1964, the last year for the bodystyle. It got me thinking of what a 6-window 1965 Cadillac might have looked like. The birth of a chop idea!

I found a good image of an appropriate car, a mint condition low-line '65 Calais pillared sedan, with the proper focus and resolution, thanks to Google Images. My "vision" wasn't quite as easy as just adding the C pillar window, though. Besides adding the extra glass, I ended up lowering the roofline, changing the angle of the C pillar and enlarging the rear window, all in order to get the same "sporty" feeling as those earlier 6-window Caddys. 

I liked how it looked at that point, but decided to "step it up a notch" and recreate a little-known version of the Caddy sedan offered in the early '60s. the short-deck. From 1961 through '63 Cadillac offered a version of their sedan with a six-inch shorter trunk for customers with pre-war garages which tended to be smaller than postwar garages. Offered at first in their base Series 62, as a 6-window, for '62 and '63 it was offered only as a 4-window, though a De Ville-level model was added. The base short-deck for '62 was named the Town Sedan and the step-up version, the Park Avenue. For '63, only the Park Avenue was offered. Since I had started out with the low-line '65 Calais, I named this chop the Town Sedan. Besides shortening the trunk, I reshuffled the chrome trim, taking off the mid-body chrome spear and adding chrome rocker panel moldings to further differentiate this shorter sedan from its longer kin. 

In the end, I liked the way it came out, but in no way do I think it's "better" than the cars Mitchell approved. The 1965 full sized cars he presented to the world, from Chevy through Pontiac, Oldsmobile, Buick and Cadillac, are all examples of a design manager at the very tippy top of his game. There isn't a bad line on any one of them, and they've all more than withstood the test of time.

• I photographed a derelict '62 Park Avenue more than 20 years ago. For my blog post, click here. 
• 1961 Cadillac DeVille info here.
• 1962 Cadillac DeVille info here. 
• 1963 Cadillac DeVille info here.

B O N U S   1 0 - M IN U T E   C H O P :

A reader, Bobf, mentioned he'd like to see an early '60s Caddy with a fastback roof similar to the '67 and '68 GM full sized coupes. I've thought about a car like that for a while, too. It's difficult to find decent high-resolution photos of older cars, though. I've been checking out '68 Cadillacs on eBay and Hemming's lately, and had in my files this medium-resolution photo of a gold Coupe de Ville. I'm particularly partial to '68s as my father gave me a '68 Hardtop Sedan de Ville for my 20th birthday back in 1977. I loved that car and kept it for about 10 years. 

I spent about 10 minutes this morning mocking up a fastback '68 Coupe de Ville to see how it would work, and I love the results. I'll keep looking for a high-resolution photo to start with, and create a real chop one of these days. This car looks like such a natural, it's too bad Caddy didn't offer it in addition to their much more formal coupe. The '68 Buick LeSabre/Wildcat looked awesome with this roofline, especially with the optional fender skirts. 

Update: As one of my loyal readers, PaulNYC, pointed out, this could logically have been a return of the "B Body" Cadillac, similar in marketing as the Series 61, discontinued in the early '50s. Perhaps the entry level Calais could have been differentiated more from the De Ville series this way.

Read More